|
|
SWM/500
0.25 kg
|
500mA switch mode PSU
Available with 5, 12 or 24 volt DC output rated at 500mA with AC or DC input.
|
|
|
SWM/1
0.61 kg
|
2 Amp Switch mode PSU
Converts either 24 volt AC or 24 volt DC to 12 volt DC. Useful for when long lines are required for cameras, or where pan and tilt is 24 volt AC and camera is 12 volt DC.
|
|
|
SWM/2
0 kg
|
Switch mode up
A 2 amp switch mode PSU for converting 7 volt DC or 7 volt AC to 12 volt DC for driving cameras from a below voltage supply line. Useful for long power lines which have large volt drops.
|
|
|
SWM/D
0.61 kg
|
Switch mode PSU
With AC or DC input and fully adjustable output via on-board preset, this 100 x 70 x 55mm board has a maximum rating of 4 amps, mains healthy LED indication and a battery charge circuit.
|
|
|
SWM/D5
0.308 kg
|
Twin DC switch mode
24 volt DC input, and twin adjustable DC outputs rated at 4 amp each. Outputs can be adjusted independently via 2 on-board presets, and both input and ouput have status indication LEDs. Each output is also independently fused. Board size 120mm x 80mm x 55mm.
|
|
|
PSU15/3SM
0 kg
|
15 Volt 3 Amp Switch mode
regulated supply, with battery charge unit. Also available boxed on request.
|
|
|
PSU15/5SM
0 kg
|
15 Volt 5 Amp Switchmode
regulated supply,fan cooled, with battery charge unit. Also available boxed on request.
|
|
|
PSU18/3SM
2.5 kg
|
17.5 Volt 3 Amp Switchmode
regulated supply, with battery charge unit. Also available boxed on request.
|
|
|
PSU18/5SM
5.7 kg
|
17.5 Volt 5 Amp Switchmode
regulated supply, fan cooled, with battery charge unit. Also available boxed on request.
|
|
|
